Dswell machinery developed the stirring concrete pump main features: mixing and pumping into one, simple to operate, easy to move, flexible, and stable performance. The pump construction operation system used in all automated, all material mixing, high pressure pumping as one; Double cylinder...
Info: I have a 1994 Chevy Geo Tracker (same build as the Suzuki Sidekick). The car is in excellent condition and was very well cared for. It was re-fit with a hydraulic clutch after the original was broken by the second owner who was just previous to me. When they converted to the hydraulic...
The First 2 pictures are hydrualic lifts under a car that they use to lift up cars from underneath!! and the bottom 2 are cards one close up and one Jack of clubs. The letters that are available are U D J K J A R C H V Z L
The owners manuel unfortunately is for a diesel engine which my car doesn't have. Kragens wasn't sure and neither were the mechanics at a shop next door. The level is extremely low. Possibilities given were brake or suspension fluid. It has a small well towards the back marked brake fluid and a...
I have a 1991 Blazer, and to access the back, you have to raise up the glass, then open the tailgate. But the things that hold the glass up only work every now and then. We've replaced them with others, but they're the same. What can I do to make them work again? When raising the glass, they...
brakes or v brakes? my bike called mongoose tyax elite 2008.
which type of brakes for best wheelie to use?
hydraulic disc brakes?
cable disc brakes?
v brakes?
please tell me the truth, simple explain and tell why reasons so I'll gave you 5stars rate!
I was having trouble shifting, so I replaced the master and slave cylinders, had the system power bled so there's absolutely no air, and it's still not throwing far enough to disengage. I can't think of anything else to do, I've tried pumping the clutch pedal to draw the rod farther out, and...
...any good...? ...compared to the ordinary wired ones, performance wise? And how much do you think these brakes usually cost on the market? Only thing I know about the brakes is that they're made by Shimano, nothing else.
I thought that hydraulic valve lifters were designed to keep the gap set correctly and automatically unlike the old solid lifters whereby they need to be regapped periodically.
the line from the master cylinder for the clutch does not go directly to the slave cylinder.it goes to an aluminum type wafer thing next to the slave cylinder.then a line goes from the wafer thing to the slave cylinder.what is it?also there is no bleeder on the slave cylinder.i need to replace a...
i went to pull the tranny out of the car and as i started taking out the bell housing bolts i accidentally broke the nylon line going to this little aluminum thing(which i would also like to know what it is).it broke off right at the metal nipple sticking out.im in a pinch and need to get the...
Took my car for NYS inspection, failed due to interior tire ware, which is due to excessive camber on the wheels (toe out), which is supposedly due to bad Lower Control Arm Bushings.
Installers are saying that they need a hydraulic press without looking at the car. If I buy this part...
brakes on a bike used to grab the wheel rim with rubber blocks,
now, 'cos the rims are usually covered in mud, mountain bikes have disk brakes (like a car).
you can have mechanical disk brakes, which work by the brake lever pulling a wire to apply the brake (like 'normal' brakes)
or hydraulic...