i got a 2000 watt mono D amplifier and 2 8 ohm 1200 watt sub woofers along with a 4 ohm 800 watt sub woofer. should i scrap the 4 ohm sub or can i work something with all 3?
800W car amplifier? Thats my amplifier specs
800 Watts MAX Power 2 x 150 Watts RMS @ 4 OHM 2 x 230 Watts RMS @ 2 OHM 1 x 460 Watts RMS @ 4 OHM Bridged
My subwoofer cant be very powerfull as it has normal size wires. Used to belong to SAMSUNG HT-D8120 home cinema.
Thank you for your time...
I have an Orion Cobalt 800.1 amp, I'm planning on getting ONE FI BL12 Subwoofer, would i order the Dual 1 or Dual 2 ohm sub? Also, is my amp strong enough to power the sub and make it sound loud? Thanks.
...be pulling 1000 watts or the estimated? The amp says its 800 watts at 4 ohms. So my sub would be about 400. Does my amps still used 1000 watts of power?
...best sound ? OK this is what i want to do i want to wire them for the best sound and to keep them from burning out the coils but not sure which is better for both parallel or series! please help the amp has connections for two subs also!
I was looking at the kicker cvr12. I will only have two subs in the trunk of my car. I will also be purchasing an amp. Please help me in ENGLISH what setup i should put together to get the most bang for my buck. Please help me with amp size/ # of channels on the amp, should i go with two or four...
i have 2 GT5-12 inch JBL sub woofers they are 4 ohm and i have a BAMF series amplifier mono at 2000 watts and that is also wired to 4 ohms so my question is can i keep the subs wired at 4 ohms and just wire the amp down to 2 ohms and be alright or will that ruin my subs or possibly keep popping...
hi i have a large box with two ma audio synergy 15s.each sub is single voice coil and 4ohms each and 300 rms each.600 peak each..they each have their own terminal cup.should i get a 2 ch amp that runs 300rms x2 or a mono amp 300rms x1 and run them both to one channel? or could i use a 2 ch amp...
hi i have a large box with two ma audio synergy 15s.each sub is single voice coil and 4ohms each and 300 rms each.600 peak each..they each have their own terminal cup.should i get a 2 ch amp that runs 300rms x2 or a mono amp 300rms x1 and run them both to one channel? or could i use a 2 ch amp...
use in my cars stereo.? Pleas read this carefully, I posted this before but nobody read it and just copy and pasted there answers form other questions. I have a 4 ohm home theater sub. the DOES NOT have its own power supply, again it DOES NOT have its own power supply, meaning I don't have to...
I recently purchased a new Alpine PDX 1-600 amp, which is supposed to be pretty good, according to reviews. I'm planning on putting one 10" Rockford Fosgate Punch P3 subwoofer with a ported box in my trunk. I know the exact model and everything, I just don't know if 2 ohm or 4 ohm is better. It...
i am wondering the most efficient way and powerful way to wire to 12 inch kicker comp single 8 ohm voice coiled subs to a mono kac 9104d amp. the hole 4 terminals is a bit confusing. i had a rockford amp 400.2 hooked and bridged the amp and had the wired parrallel and it hit way harder and...
...has 1080 watts of power should i? can i wire 2 cvrs 4 ohm dual voice coil to 2 ohm stable stereo amp? the amps has 1080 watts of power can i go parralel wiring or should i keep it series
...ohm amp for max sound o/p? can i connect a resistor in parallel to the 2 speakers in series to reduce the total impedance of the system to 8 ohms? or is there another way?
Ok I have 7 0603 SMD LEDs and another set with 7 0603 LEDs, both on separate circuits. So 7 0603 SMD LEDs being lit from a 5 volt source how many ohms do I need to resist if each LED is 1/8 watts each? I used this cac: http://www.the12volt.com/ohm/page2.asp and got 28.57143 ohms how many is...