Hello, I have this 1967 Ford engine with a 2bbl carburetor. I wish to replace the current intake and carburetor with a 4 barrel carburetor and intake. Looking for advise on which intake and carb should I be considering. The engine is stock. Just looking for a little more power on the hills...
hey i just finished installing my carburetor in my dirt bike and i tried to start it and it turned on but it only stayed on for a while what should i do by the way i cleaned the carburetor thanks for the help
I have a 92 Arctic Cat Prowler 440 and i am installing a silencer on the carbs. only problem is the driven clutch and all sorts of other stuff is in the way. if anyone has worked on this before, i would like to know where to start to install the thing.
Ok, so I just rebuilt and reinstalled the carb, air box, and gas tank onto my bike. It starts up and runs fine, idles fine, rev's fine, but here is the dilemma. The idle is tuned to 1500 rpms, and when you pull on the throttle, it will rev fine, to 5, 6, or whatever rpm you pull to, but when the...
While I was riding my Cagllari Daytona pocket bike the screw on the bottom of the carburetor came off. So I went into my garage and found a screw that would fit. I found a screw but it was way longer and as I was putting it in it broke and I can't get it off. Now the gas just comes out of the...
Hi everyone. Just got my motorcycle license and bought this bike to learn/drop/scratch etc. for just $300. The bike needed some parts like rear tire, gas cap, filters etc. but it's all nothing, I already did it all myself with ease. The major thing it needs is a carb cleaning and tune-up because...
31mm carb work aswell? specific carb= 32mm Mikuni econo-jet carburetor
sled= 1979 kawasaki drifter 440
im not sure if i'm correct, but i think the 31/32mm measurements are just for the port to the air filter so i think a 31mm carb would work on the sled... any tips and/or pointers are welcome
I am looking for a carburetor bowl for my snowmobile. It is a 98 yamaha vmax xtc 500 deluxe. The bowl is cracked where drain screw goes in. I was wondering if anyone has a bowl i could buy.
Dear all,
I would like to replace the carb of my GN125 but do not know the type (because the existing one is a replacement). Anyone know it's type and/or a relevant one
Thanks
...bike won't idle? The bike wont stay on. When i turn it on and hold the accelerator to the max it stays on but as soon as i let go of it the bike shuts off.. I tied the idle screw but still nothing. i tried messing with the (air/fuel mixture screw) but nothing seems to help. so can anyone help...
...bike won't idle? The bike wont stay on. When i turn it on and hold the accelerator to the max it stays on but as soon as i let go of it the bike shuts off.. I tied the idle screw but still nothing. i tried messing with the (air/fuel mixture screw) but nothing seems to help. so can anyone help...
...wont stay on..? I just bought a performance carburetor for my pocket bike (X1) and the bike wont stay on. When i turn it on and hold the accelerator to the max it stays on but as soon as i let go of it the bike shuts off.. I tied the idle screw but still nothing. i tried messing with the...