My 97 idles a little rough and lack of power, I think the timing chain is a tooth off, becaus this happend after head gasket replacement. The car still starts up and drives no miss fire but lack of powe. I think the plate on the top right of the engine is off cuz the arrows not 100% straight in one dirction on top and bottom plates. I need a digram or info on how to set the timing at least the top ones. Thanks
You're right MasTec no spacial tools were used to hold the camshfts or the units. The adjustment unit inlet camshaft and the impulse sending wheel marks are nor lined up corractly, the arrows are off. I think this is the spot were we massed up at. So if I get info or digram explain how to set the marks on the adjustment unit inlet and the Impulse sending wheel that will fix my z3 and be happt again
. Thanks for the help tho
You're right MasTec no spacial tools were used to hold the camshfts or the units. The adjustment unit inlet camshaft and the impulse sending wheel marks are nor lined up corractly, the arrows are off. I think this is the spot were we massed up at. So if I get info or digram explain how to set the marks on the adjustment unit inlet and the Impulse sending wheel that will fix my z3 and be happt again
. Thanks for the help tho