Using Winodws XP- Professional. I have installed a NEW Second Hard Drive(as C:\ or Primary/Master). After installing the New Hard Drive (As Master and Boot Drove ), my CD Writer or DVD Writer are NOT Working anymore.

This is my Set Up, I set Jumper Accordingly:-
1. New 200GB HD -Master, Connecter with Master End OF the IDE and JUMPER set to Master Position
2. OLD 80 GB HD, Connected to the Salve End of the IDE, Jumper is in the Slave Position
3. CD Writer - Connecter with Master End OF the IDE and JUMPER set to Master Position.
4. DVD Writer - Connected to the Salve End of the IDE, Jumper is in the Slave Position
I put the JUMPER as per HD picture position shows or according to the OEM.
CD and DVD both were working fine untill I installed the New HD.

CD and DVD driver still can Read from CD or DVD and I can install S/W by putting CD or DVD on it but cannot write (Burn CD/DVD). They just spin but does not burn. BIOS Setup (F11) looks ok.
Please HELP.
P.S. I am NOT Hardware Professional. If you reply, please answer in Step By Step, so that I can follow you.
This is a HP Pavilion a550y Custom made by HP (according to my specification). Originally it had a single HD (80 GB)