I changed the clutch and flywheel on my 92 mazda miata but now it wont go into gear?

[mgam]

everything seems to be put back together correctly, the clutch was lined up perfectly and the clutch pedal feels perfect but when i turn the car on and try putting it into gear it wont move out of neutral. when the car if off the gears go in easily except for reverse. but yea when its on it only stays in neutral. does anyone know what is wrong with my car?

[gimpalomg]

The clutch is not disengaging. It could be wrong parts, incorrect installation or simply incorrect adjustment. I think (and everytime I do I get in trouble) that car has hydraulic linkage. If it does then try bleeding it. Air in the lines will compress and not move the slave cylinder but it still "Feels" right.

Good luck

GIMP

[OldManDirt]

Check how the slave lines up with the clutch arm. The other thing (not easy to check) is to make sure the clutch arm is in the throw out bearing. The last thing you don't want to hear, the clutch disk may be in backwards.