I am trying to derive the source of universal morals. Please also submit other questions to help with this if you have them.
Something more than a one liner please. Why do we all have the right to live?
Not everyone has family or loved ones.
It doesn't help me to answer like I had poor...
The car is running rough and does not change at ALL when I unplug the #4 injector or spark plug wire.
I've checked the ohms at the injector, it was the same across the ones firing (I think around 2.4 ohms, it was a couple days ago).
I checked the voltage with the car running and it was the same...
'86 Volvo 240 (b230f engine, LH 2.2 injection)
If I disconnect the temperature sensor and it runs better would that mean the temp sensor is bad?
Right now its running rich with the sensor connected. When I disconnect it, it still smells rich, but it quits shaking violently. This seems backwards...
...'86 volvo 240 dl? I have an '86 volvo 240 dl (B230F engine w/LH 2.2 injection) there is a black adjuster screw on the bottom of the throttle body, what does that do?
I have an '86 volvo 240 dl (B230F engine w/LH 2.2 injection). Its running rough and rich, it seems to run better at higher RPMs, and worse under load. What are the most common causes of this?
I have an '86 volvo 240 dl that is misfiring/"hesitating" around 40mph. The distributor, wires and plugs are only a few months old. The plugs are clean and gapped correctly. It overheated a couple of weeks ago when the thermostat went out and I replaced the waterpump at the same time. A lot of...
How tight to a tighten down the bolts on a '86 volvo 240 water pump. The manual I bought doesn't say. The torque won't help me cause I don't have a torque wrench, so just general discription would help a lot. (I stripped the threads on a stud last time)
Had a water pump start leaking, when I replaced it with a new one, it leaked even worse (around the gasket and O rings this time). The process I took...
I unbolted everything and removed the water pump
I scrapped everything off with a wire brush
I coated both sides of the gasket with red gasket...